Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care / preparation
Tools and equipment
Safety
Smart repair
Abrasive disc
Abrasive disc for use with a sanding machine or sanding block. Many of our sanding pads are described as multi-purpose sanding discs with very good sanding properties in all types of varnish, composite, and wood materials.
3M 88410-62
3M 50079 Trizact Fine Finishing Disc
€96,01
3M 88402-54
00127 Stickit Finesse-it 268L PSA - Ø 36,5mm
€36,35
3M 33892
Paint correction, round 32 mm
€34,96
3M 30804
3M Trizact Hookit Foam Disc 75mm P8000
€57,33
3M 88411-73
3M 471LA Trizact Clearcoat Sanding Disc 75mm P1500
€49,97
3M 88411-16
Scotch-Brite Roloc CR-DR S XCS 75mm 18350
€70,59
Indasa 75002-400
Rhynogrip RedLine 150 mm P400
€10,04
3M
3M Trizact 150mm
€103,13
Norton 88409-35
Multi-Air A275, Soft-Touch, 150 mm P500
€29,65
Norton 72001-85
Multi-Air Norzon - Selfgrip Discs, 150 mm P60
€99,52
Abrasive and sanding disc of professional quality
The abrasive and sanding disc is the same product, are an important tool in many projects, and can help remove rust, paint, and other surface damage. It is important to choose the right sanding disc to achieve the desired result. Many of our sanding discs are described as multi-purpose sanding discs with very good sanding properties in all types of lacquer, composite and wooden materials.
Change sanding parts regularly for the best finish
When sanding with sanding discs, it is important to choose the right type with the right coarseness and grain size to achieve the best result. In addition, it is also important to replace the sandpaper when it is worn, as it can otherwise give a bad result.
Sanding discs in several sizes
We have sanding and abrasive discs whose dimensions range from Ø 32 mm, which are primarily used for finish and varnish correction, up to professional eccentric sanders of ø150 mm and even up to Ø 200 mm. We sell sanding discs in many dimensions, and can therefore cover most needs and most sanding machines. In many construction markets, you may have noticed that sanding discs and sanding discs are available in a diameter Ø 120 mm, which is also a very common diameter size for sanding discs and discs.
Assortment by professionals for professionals
Our selection consists primarily of 150 mm, which is the standard for many professionals. In the selection you will find sanding discs for every purpose - and which have been developed for professional use, where the focus is on dust-free sanding, but the sanding discs can of course be used privately. We sell sanding parts from recognized brands, including Norton, Mirka, 3M, and Q-Refinish.