Product added to basket
Loading
Loading

Lechler

04380 Polydur Zinc

About the product

04380 Polydur Zinc is a universal knifing polyester putty of medium grain, with very high filling power. Suitable for leveling large irregularities on normal steel sheets and zinc-coated steel sheets on bodywork and commercial vehicles.

04380 Polydur Zinc is characterized by excellent adhesion to steel, zinc-coated sheets, cast iron, aluminium, FGRP (glass fibre). Easy application. Easy to grind. Very high filling capacity. Quick drying, and then it is suitable to be dried with IR lamps (normal and short wave).

Preparation of the substrate
On zinc-coated plates, steel, aluminium. These substrates must be roughened and degreased with 00695 SILICONE REMOVER SLOW.

For old coatings, 04380 must not be applied to solvent sensitive coatings and NEVER apply to Wash Primer. In case of previous primer application, use epoxy primers such as 04384 EPOFAN PRIMER R-EC GRIGIO and allow to dry.

04380 Polydur Zinc is a 2K polyester putty, and therefore it must be mixed according to the mixing ratio

1000 ml 1000 g - 04380 POLYDUR ZINC
20-40 ml 10-30 g - 00281 POLYDUR HARDENER

In summer, the catalysis can be reduced to 1% by weight, and in winter it can be increased to 3%

Read more Read less

Safety and enviroment

H sentences

  • H319: Causes serious eye irritation.
  • H318: Causes serious eye damage.
  • H317: May cause an allergic skin reaction.
  • H315: Causes skin irritation.
  • H361: Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
  • H314: Causes severe skin burns and eye damage.
  • H332: Harmful if inhaled.
  • H304: May be fatal if swallowed and enters airways.
  • H412: Harmful to aquatic life with long lasting effects.
  • H335: May cause respiratory irritation.
  • H302: Harmful if swallowed.
  • H372: Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
  • H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
  • H226: Flammable liquid and vapour.

P phrases

  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P313: Get medical advice/attention.
  • P308: IF exposed or concerned:
  • P351: Rinse cautiously with water for several minutes.
  • P280: Wear protective gloves/protective clothing/eye protection/face protection.
  • P405: Store locked up.
  • P501: Dispose of contents/container to...
  • P201: Obtain special instructions before use.
  • P260: Do not breathe dust/fume/gas/mist/vapours/spray.
  • P305: IF IN EYES:
Read more Read less

04380 Polydur Zinc 2K Polyester Filler

  • Stock: 24 In stock
  • Item no.: L0040380K2,5
  • Unit: 2,50 KG
Limited quantity - item is being omitted
;
Recommended accessories