20-60X 6:1 2K Universal Primer Filler Thix

The filler is also characterized by easy processing, optimal top coat condition, fantastic adhesion and high corrosion protection. Small through cuts can be primed directly.

Particularly good adhesion on: Stainless, galvanized, iron and as an adhesion promoter on older paintwork.

Color White, Black, Yellow and Red

Mix ratio Vol. 6:1 Airless / Airmix or 6:1:1 Air/Overcup/menbran

Hardener 30-699-5 Füllerhärter

Spray viscosity at 20 °C 25-30 s 4 mm DIN / Airless 40-60 s

Pot life 2-5 hrs.

Layer thickness / Dry film approx. 50 - 100 µm depending on corrosion category.

Note

Overpainting with SWIN-2 layers-Basislack Silber within the first 3 hours, or after complete drying. Base coat must be set with Universal thinner normal 60-101-6.

For drying times up to 72 hrs. top coat can be applied directly, with a longer drying time an additional layer (20-30 my) is required as an adhesion agent of this Grundierfiller 20-6**-10.

Etch Primer must only be overcoated after complete drying (1 hour at 20°).

Apply Polyester materials first after complete drying.