Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care and polishing
Tools and equipment
Safety
Smart repair
Blue Discount
Q-Refinish
70-460 Spot Blender Aerosol
About the product
For homogenous paint transitions in the blending area. No colour deviations. Does not need to be polished.
- Industries: Car Refinish, Commercial Vehicle Refinish
- Brand: Q-Refinish
- Product type: Fade Out Thinner
70-460-0400 Spot Blender Aerosol
-
Stock: 348 in stock
-
Item no.: 70-460-0400
-
Unit: 1 Spray(400 ML)
Limited quantity - item is being omitted
| Go Big | Number of sales units | ||
|---|---|---|---|
| 1 Carton | 6 |
Safety and enviroment
GHS
H sentences
- H302: Harmful if swallowed.
- H336: May cause drowsiness or dizziness.
- H318: Causes serious eye damage.
- H315: Causes skin irritation.
- H225: Highly flammable liquid and vapour.
- H226: Flammable liquid and vapour.
- H222: Extremely flammable aerosol.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H412: Harmful to aquatic life with long lasting effects.
- H280: Contains gas under pressure; may explode if heated.
- H304: May be fatal if swallowed and enters airways.
- H312: Harmful in contact with skin.
- H335: May cause respiratory irritation.
- H373: May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
P phrases
- P211: Do not spray on an open flame or other ignition source.
- P103: Read label before use.
- P302: IF ON SKIN:
- P305: IF IN EYES:
- P351: Rinse cautiously with water for several minutes.
- P332: If skin irritation occurs:
- P352: Wash with plenty of water/…
- P313: Get medical advice/attention.
- P102: Keep out of reach of children.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P410: Protect from sunlight.
- P251: Do not pierce or burn, even after use.
- P310: Immediately call a POISON CENTER/doctor/…
- P412: Do not expose to temperatures exceeding 50°C/ 122°F.
- P101: If medical advice is needed, have product container or label at hand.
- P338: Remove contact lenses, if present and easy to do. Continue rinsing.
70-460-1000 Spot Blender
-
Stock: 96 in stock
-
Item no.: 70-460-1000
-
Unit: 1 L
Limited quantity - item is being omitted
| Go Big | Number of sales units | ||
|---|---|---|---|
| 1 Carton | 6 |
Safety and enviroment
GHS
H sentences
- H319: Causes serious eye irritation.
- H318: Causes serious eye damage.
- H225: Highly flammable liquid and vapour.
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
- H332: Harmful if inhaled.
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H312: Harmful in contact with skin.
P phrases
- P361: Take off immediately all contaminated clothing.
- P351: Rinse cautiously with water for several minutes.
- P362: Take off contaminated clothing.
- P353: Rinse skin with water [or shower].
- P338: Remove contact lenses, if present and easy to do. Continue rinsing.
- P303: IF ON SKIN (or hair):
- P310: Immediately call a POISON CENTER/doctor/…
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P305: IF IN EYES:
- P321: Specific treatment (see ... on this label).