Alu-Zinc Spray

Corrosion protection means that it prevents rust, and this makes it particularly suitable for use outdoors on metal.

Motip Alu Zinc Spray can also be spot-welded and is resistant to petrol and other chemicals.

Here's how you do it

BEFORE USE, CAREFULLY READ THE INSTRUCTIONS FOR USE ON THE PACKAGING AND HANDLE IT ACCORDINGLY.

The surface must be clean, dry and free of grease. Remove loose old paint and rust and sand the surface.

The surface must be clean, dry and free of grease. The aerosol must be at room temperature. Best processing temperature 10 to 25°C.

Shake the aerosol for 2 minutes before use and spray a sample. Distance to the surface to be treated, approx. 25 to 30 centimeters.

Apply the alu-zinc spray in several thin layers. Before applying the next layer, shake the aerosol again. When desired, a primer and varnish can be applied after drying.

Clean the valve after use (turn the aerosol upside down and press the nozzle for about 5 seconds).

The drying time depends on the ambient temperature, the humidity of the air and the thickness of the applied varnish.