Aquaprimer 2900-02 Tst101195

Apply in flow coat or by dipping. Due to evaporation, the dry matter content in the liquid must be regularly adjusted with water. Spraying is possible until the surface is saturated. Application in a brush machine is also possible.

The product must be stirred thoroughly before use.

Note Theoretical coverage 12-13 m²/l Consumption may vary, depending on the quality of the wood and application method.

Pretreatment

The wood must be free of wood dust and dirt. The moisture content of the wood must be approx. 13% and must not exceed 15%. Wooden substrates that do not meet durability class 3, EN 350:2016 must be pre-treated. Teknos has a range of wood preservatives which meet the requirements of EN 599. Please contact Teknos for further guidance.

Method of application

Dipping, Fluting Spraying is possible until the surface is saturated. Application in a brush machine is also possible.

Application conditions

Stir thoroughly before use. Optimum temperature for products and surroundings: +18 °C - +22 °C. Optimum relative humidity: approx. 50%. Due to evaporation, the dry matter content in the liquid must be regularly adjusted with water. Wet film range: 75-100 µm.

Dilution Not necessary. The product is delivered ready for use.

Drying time +23 °C / 50 % RH

- handling dry 1-2 hours -

sanding and reprocessing dry 2-3 hours

The drying time can be reduced using special drying systems to accelerate drying. The listed times are indicative and may vary depending on wood quality, temperature, humidity, ventilation and layer thickness.

Primed items must always be finished with a topcoat before they are exposed to the weather.