Inerta 165 Tix Tm-302

INERTA 165 is a 2-component epoxy paint with a low solvent content, based on liquid epoxy. Used on steel in the epoxy system. Can also be used on concrete surfaces. Can also be used on objects that are immersed in water, e.g. sluice gates and pipes in hydroelectric power plants.

The product has good adhesion to sandblasted surfaces and the wear resistance is extremely good. The coating is therefore suitable for use on objects that are exposed to strong mechanical stress.

INERTA 165 can be applied by airless spraying, either with a single-component or hot two-component spray.

INERTA 165-02 HARDENER can also be used in the product. Compared to the standard hardener INERTA 165 HARDENER, it is possible to shorten the curing time and extend the potlife of the product.

In addition, the spraying properties are improved and it is possible to apply higher layer thicknesses without getting runners and the temperature during drying can be +5 °C.

Gloss (60°) Gloss

Hardener Comp. B: INERTA 165 HARDENER or INERTA 165-02 HARDENER

Mixing ratio (A:B) 2:1 parts by volume

Pot life INERTA 165 HARDENER 30 min. INERTA 165-02 HARDENER 60 min.

Thinner TEKNOSOLV 9506

Storage The storage stability is stated on the label. Store in a cool place in tightly closed packaging