Product added to basket
Loading
Loading

Teknos

Teknodur Combi 3440-05 Base

About the product

Note this is a base and must be tinted with teknos Tonesystem Teknotint.

TEKNODUR COMBI 3440-05 Used as a 1-layer paint on aluminum and anodized aluminum. Here you get a two-component anti-corrosive pigmented polyurethane paint with a low content of solvents. The hardener used is an aliphatic isocyanate resin.

The paint provides a film with good mechanical properties and good weather resistance. The product must be dried at approx. +60 °C for approx. 1 hour, as adhesion and mechanical properties improve.

Gloss (60°) Semi-gloss

Mixing ratio (A:B) 6:1 parts by volume with hardener Comp. B: TEKNODUR HARDENER 7230

Pot life, 23 °C 60 min

Thinner Do not use universal thinners as they may be incompatible with the system.

Fast thinner: TEKNOSOLV 7140-00.

Standard thinner: TEKNOSOLV 6220-00.

Slow thinner: TEKNOSOLV 6190-00.

Pretreatment The surfaces are cleaned of impurities that may be harmful for pretreatment and application. In addition, water-soluble salts are removed by suitable methods. The surfaces of the various materials are pre-treated as follows:

ALUMINUM SURFACES: The surfaces are treated with a suitable cleaning agent. Surfaces exposed to the weather are roughened with sandblasting (AISaS) or sanding.

ANODIZED ALUMINUM SURFACES. It is important that the anodizing is carried out in accordance with applicable standards. It is recommended that Tekno's laboratory has tested and approved the quality of the anodizing before TEKNODUR 3440 is used. The surfaces are cleaned with TEKNOSOLV 6560. Choose the place and time for the treatment, taking into account that the pre-treated surface does not become dirty or damp before the subsequent treatment. Other instructions regarding pre-treatment of the surface can be found in the standards EN ISO 12944-4 and ISO 8501-2.

Application method can be done with Conventional spraying, Air assisted airless spraying, Airless spraying.

Application MIXING OF COMPONENTS: Consider the pot life of the mixture when calculating the amount to be mixed at one time. Before application, base and hardener are mixed in the right ratio. Carefully stir down to the bottom of the container. Inadequate stirring or incorrect mixing ratio results in insufficient curing and poorer film properties. Spray gun and container are cleaned before use with a thinner suitable for the paint.

Indicative viscosity DIN-cup 4 mm +20 °C

Conventional spraying 18-20 s

Air-assisted airless spraying 20-30 s

Airless spraying (nozzle: 0.009”-0.013”) 20-30 s

Application conditions During application and drying, the temperature of the air, the surface and the product must be above +5 °C and the relative humidity below 80%. In addition, the temperature of the surface to be treated and the product must be at least +3 °C above the dew point of the air.

Drying time +23°C / 50% RH (dry film 80 μm)

- dust dry 30 minutes (ISO 1517:1973)

- non-stick 5 hours (DIN 53150:1995)

Cleaning TEKNOSOLV 6220-00

Read more Read less

Safety and enviroment

GHS

    Flammable Gases Flammable Solids Pyrophoric Liquids
Read more Read less

Teknodur Combi 3440-05 Base 1

  • Stock: 11 in stock
  • Item no.: 3440-05-1-2,34
  • Unit: 2,34 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 1

  • Stock: 15 in stock
  • Item no.: 3440-05-1-7,8
  • Unit: 7,80 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 2

  • Stock: 10 in stock
  • Item no.: 3440-05-2-2,34
  • Unit: 2,34 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 2

  • Stock: 12 in stock
  • Item no.: 3440-05-2-7,8
  • Unit: 7,80 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 3

  • Stock: 10 in stock
  • Item no.: 3440-05-3-2,34
  • Unit: 2,34 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 3

  • Stock: 9 in stock
  • Item no.: 3440-05-3-7,8
  • Unit: 7,80 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 4

  • Stock: 8 in stock
  • Item no.: 3440-05-4-2,34
  • Unit: 2,34 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 4

  • Stock: 8 in stock
  • Item no.: 3440-05-4-7,8
  • Unit: 7,80 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 5

  • Stock: 6 in stock
  • Item no.: 3440-05-5-2,34
  • Unit: 2,34 L
Limited quantity - item is being omitted

Teknodur Combi 3440-05 Base 5

  • Stock: 10 in stock
  • Item no.: 3440-05-5-7,8
  • Unit: 7,80 L
Limited quantity - item is being omitted
;