1K Zinc Primer Light Gray

Application: Ideal for spot repairs and finishing of parts.

Quality and Features:

Excellent adhesion and corrosion protection: particularly effective on bare zinc-coated steel.

Specially Formulated: For refinishing OEM coated zinc plated car bodies.

Simple and time-saving application

Quick drying

Physical and Chemical Data:

Binder: Specific blend of resin

Colour: Light grey

Odor: Solvent

Effectiveness: 1 m²

Substrate: Bare zinc-coated metal, ground. Sanded through areas on galvanized substrates.

Temperature resistance: Up to 90°C

Storage: 10 years shelf life with proper storage (10°-25°C, max 60% relative humidity)

Size: Aerosol cans, maximum nominal volume 400 ml

VOC value: 259.3 g

Instructions for use:

Clean the surface thoroughly and sand.

The damaged area must be dry and free of dust and grease.

Clean the substrate with ColorMatic silicone remover no. 174469.

Shake the can well for 2 minutes.

Perform a test spray.

Do not use on thermoplastic substrates!

Note: Before applying ColorMatic 1K Primer for Zinc, treat the surface with ColorMatic Silicone Remover No. 174469.

For best results, it is recommended to use ColorMatic 2K hi-speed Primer after the 1K primer is dry. This can then be overpainted with our water-based or solvent-based mixing systems.

Security: For professional use only. Wear suitable respiratory protection (type A2/P3).

ColorMatic 1K Primer for Zinc is the perfect solution for efficient and reliable preparation of zinc-coated metal surfaces.