Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care and polishing
Tools and equipment
Safety
Smart repair
Motip
1K Filler Spray
About the product
Motip fast drying filler with excellent coverage to fill small irregularities in surfaces, treated and untreated, of wood, metal and aluminium. The filler has excellent filling properties and adhesion and is rust preventive.
MoTip Filler is easy to sand, both wet and dry (from grain 400), and is re-sprayable with all lacquer systems.
The surface should be clean, dry, and free of grease. The aerosol should have room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre. Apply the filler in several thin layers.
Before applying the next layer, again shake the aerosol. After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
- Industries: Car Refinish, Commercial Vehicle Refinish, Industrial Metal Finishing
- Brand: Motip
- Product type: Filler
- Color: Yellow
- Substrate: Wood, Bare metal, Aluminum
