Teknolac Aqua Primer 2964-10

Pretreatment

The surfaces are cleaned of impurities that can be harmful to the surface treatment and the paint. In addition, water-soluble salts are removed by suitable methods. The surfaces of the various materials are subsequently pre-treated.

Cold-rolled steel: Cleaned with a suitable pre-treatment chemical.

Hot-rolled steel: Blast cleaned or sandblasted to degree of cleaning SA 2½ according to the standard ISO 8501-1:1988.

Recommended shop primer: KORRO PVB 3040 or KORRO AQUA 2740.

Drying time at +23 °C / 50 % RH

- surface dry (ISO 1517)

- non-stick Approx. 30 minutes Approx. 2 hours

Application conditions The surface to be painted must be dry. During application and curing, the temperature of the air, the paint and the surface must be above 15 °C and the relative humidity below 70%.

Application Equipment

Air atomization Airless (Nozzle: 0.011-0.015”)

Thinner TEKNOSOLV 6990-00

Indicative viscosity DIN-cup 4 mm 20 °C 50-100 s Undiluted or up to approx. 5% addition of water.

The product must be stored frost-free!