Pu 9500 Foam

Application
1. Remove the safety catch from the activation lid.
2. Use the wire to pull the activation lid out as far as it will go (about
11 cm as far as notch).
3. Break off wire at the intended break point (notch) above the valve.
4. Screw plastic adapter into valve.
5. Shake can vigorously up and down.
6. Apply foam with valve pointing downward.
7. About 0.25 liters of foam is extruded per second of foaming time,
for free foaming.
After activation, always release at least some of the foam. Use
sparingly as the foam expands by about 50 to 100% without
confinement and by about 100 to 200% in cavities.