1K Epoxy Primer Gray

Application: Ideal for spot repairs and finishing of parts.

Quality and Features:

Excellent adhesion and corrosion protection: For steel, galvanized steel, aluminum and fiberglass.

Easy and time-saving application

Quick drying

Good flow

Can be painted over: With ColorMatic pre-fill base paints and RAL acrylic topcoats.

Good insulation against moisture

Possibility of wet-on-wet application

Physical and Chemical Data:

Binder: Epoxy resin

Colour: Grey

Odor: Solvent

Effectiveness: 1 m²

Substrate: bare metal sanded, zinc-coated cleaned and sanded, aluminium, anodised aluminium, stainless steel, old paints cleaned and sanded, fiberglass materials cleaned and sanded, plastic base (pre-treated with ColorMatic 1K Plastic Adhesive)

Drying time (at 20°C, 50% relative humidity):

Dust dryer: 5 min

Touch dry: 15 min

Dry thoroughly: 30 min

Grindable: approx. 20 minutes

Paintable: 12-15 min

Temperature resistance: Up to 90°C

Storage: 10 years shelf life with proper storage (10°-25°C, max 60% relative humidity)

Size: Aerosol cans, maximum nominal volume 400 ml

VOC value: 274.5 g

Instructions for use:

Remove all rust from the metal.

Clean the surface with ColorMatic Silicone Remover No. 174469, then sand.

Clean fiberglass surfaces with ColorMatic Plastic Cleaner antistatic no. 190261.

Shake the can well for 2 minutes.

Perform a test spray.

The damaged area must be free of grease, dust and dry.

Safety: Read msds Wear appropriate respiratory protection (type A2/P3).

ColorMatic 1K Epoxy Primer is the ideal solution for efficient and reliable preparation of surfaces. Paint over with ColorMatic pre-fill spray paint or topcoats in RAL acrylic.