Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care and polishing
Tools and equipment
Safety
Smart repair
Q-Refinish
90-520 Venturi Air Blow Gun
About the product
Professional dry air blow gun. This dry air blow gun dries up the finished surface of the waterborne paints. Air Nozzle, Filter screen, Filter holder, Air tube, Handle, Nut, and shuf-off-valve with thread: 1/4" PS (NPS).
Operations
This dry air blow gun is supplied by an air compressor. Connection air with coupler, plug then open shut-off valve which can operate the dry air blow gun to dry waterborne paints of auto refinish.
The maximum inlet pressure is 7 bars (100 psi) and the working pressure is 3-5 bars (43-73 psi).
Cleaning
Pulling off the filter holder than can be removed the stainless steel sleeve, please use thinner and brush clean dry blow gun stainless steel sleeve which gets dirty with paint materials.
Maintenance
Replace damaged and clogged sleeves.
- Maximum inlet pressure: 7 bar
- Working pressure: 3-5 bar
- Air consumption: 12.3 cfm (350 l/min) at 60 psi
- Air inlet thread: 1/4" PS (NPS)
Q-Refinish 90-530-0002
90-530 Venturi Air Drying Stand + 2 Blow Guns
€765,17