Aquatop 2600-82 Semi-Gloss Clear T070

Pre-treatment The wood must be free of wood dust and dirt. The moisture content of the wood must be approx. 13% and must not exceed 15%. Wooden substrates that do not meet durability class 3, EN 350:2016 must be pre-treated. Teknos has a range of wood preservatives that meet the requirements of EN 599. Please contact Teknos for further guidance

Application method Airless spraying, Air-assisted airless spraying, Electrostatic spraying

Application conditions Stir thoroughly before use. Optimum temperature for products and surroundings: +18 °C - +22 °C. Optimum relative humidity: approx. 50%. Wet film range 125-300 µm.

rtynding The product is delivered ready for use

Drying time +23 °C / 50 % RH

- handling dry 1-3 hours

- sanding and reprocessing dry 3-4 hours

The drying time can be reduced using special drying systems to accelerate drying. The listed times are indicative and may vary depending on wood quality, temperature, humidity, ventilation and layer thickness.

Surface treatment system AQUATOP 2600-82 is part of a treatment system where the dry film layer thickness must be > 100 µm. Used on grounds of intermediate subjects. Colorless is never used as a final treatment if the wood is to be exposed to the weather.