Sata Dry Jet 2
About the product
Sata dry and blow gun to speed up the drying process after applying water-based paint.
Thanks to its special shape, the SATA dry jet 2 has an extra large air cone, which further increases drying efficiency, helps reduce flash time and improves the drying process.
Recommended inlet pressure is 29 to 35 psi and uses very low CFM 8.2 to 9.35 CFM. With the Venturi principle design CFM is magnified x10 to give a 92.35 CFM output. Due to the integrated air regulation, the painter can precisely adjust the air supply to adapt the air volume to ideally suit the requirements of the painted object.
- Air consumption: 270 Nl / min (9.5 cfm)
- Recommended inlet pressure: 2.5 bar (36 psi)
- Max. Operating temperature: 60 °C
- Max. Operating overpressure: 10 bar (145 psi)
- Air intake: G 1/4 a