Sprayplast Removable Coating

With MOTIP Removable Coating, you can easily give different parts of your car, such as rims and logo emblems, a completely new look. The coating is removable, so you can remove it again by peeling it off if you want to change the look.

It is suitable for smooth, non-absorbent surfaces such as metal, aluminum, glass and 2K-lacquered surfaces. Please note that it should not be used on surfaces treated with 1K-lacquer.

Instructions for use

Before use, carefully read the instructions on the packaging and act accordingly.

Pre-treatment: Clean the surface, do not sand. The surface must be clean, dry and free of grease. Do not apply any primer.

The surface must be clean, dry and free of grease. The aerosol must be at room temperature. Best processing temperature 10 to 25°C at a relative humidity of <65%.

Before use, shake the aerosol for 3 minutes and spray a sample. Distance to the surface to be treated, approx. 25 to 30 centimeters.

Apply at least 5 layers of removable varnish, with an interval of 5 minutes. To avoid cracking of the film when it is removed, apply an additional layer at critical points (corners and edges).

The drying time depends on the ambient temperature, the air humidity and the thickness of the varnish applied.