1K High-Build Filler

Advantage:

High filling and covering capacity: Provides an even and covering surface.

Excellent adhesion: Bonds well to steel, aluminium, polyester filler, hardened old layers and plastics such as PC, PVC, ABS, PA, SAN, PU, ​​UP, EP.

Resistant to silicone remover: Provides a clean and lasting surface.

Easy to sand: Can be sanded both wet and dry.

Quick-drying and simple handling: Time-saving and efficient in use.

Paintable: Can be painted over with both water-based and solvent-based base colors.

Product details:

Binder: Acrylic resin

Colour: Grey

Odor: Solvent

Effectiveness: 400 ml covers approx. 1.2 m²

Substrate: Steel sheets, aluminium, polyester putty, hardened old paints and plastic types such as PC, PVC, ABS, PA, SAN, PU, ​​UP, EP.

Drying: Air dry for 60 minutes at 20°C or 15-20 minutes with IR heat

Temperature resistance: Up to 90°C

Layer thickness: Three layers give approx. 70-80 µm

Storage: Stable for up to 10 years if stored correctly (10°-25°C, max 60% relative humidity)

Size: 400 ml aerosol can

VOC value: 250.3 g

Instructions for use:

Remove all rust from the damaged area and sand the surface.

Make sure the area is dry and free of dust and grease.

Shake the can thoroughly for 2 minutes before use.

Perform a spray test to ensure proper application.

Note that with higher layer thicknesses, the drying time is extended.

Recommended for professional use only. Use suitable respiratory protection (type A2/P3).

Read and follow the warning texts on the label carefully before use.