Product added to basket


70-425 Thermo Coating Spray

About the product

Q-Refinish Thermo Coating Spray is a particularly heat-resistant special paint based on Silicone resin. Suitable for parts that are particularly exposed to high temperatures. It can be used in the engine area, on the exhaust system, on two-wheeled vehicles, grills, chimneys and all places where temperatures up to 650°C occur. The paint only hardens when slowly heated from 250°C.

Surfaces: Steel

The application takes place directly on the metallic surface. No primer required! No pre-treatment with primer and no post-treatment with other topcoats and clearcoats is necessary.

Do not spray on resin-painted surfaces, as the paint may lift. Remove loose rust, grind and wash off grease. Apply only to dust-free and dry surfaces at a spray distance of 10 - 15 cm

2 spray layers (approx. 15 μm dry film thickness per spray layer). 5 minutes waiting time between layers.

The paint is dust dry: 10 min. Touch dry: 45 min. The stated drying times refer to a dry film thickness of 30 μm and an ambient temperature of 20°C.

Note that the paint only hardens at temperatures above +200°C. Warm up slowly.

After finishing the painting process, the can must be turned over and the valve must be emptied.

  • Industries: Car Refinish, Bodywork, Commercial Vehicle Refinish, Industrial Metal Finishing
  • Brand: Q-Refinish
  • Temperature resistance: 650 C°
  • EAN: 4251380501731
  • Supplier item no.: 70-425-0402
Read more Read less

Safety and enviroment


    Flammable Solids Flammable Gases

H sentences

  • H222: Extremely flammable aerosol.
  • H226: Flammable liquid and vapour.
  • H225: Highly flammable liquid and vapour.
  • H410: Very toxic to aquatic life with long lasting effects.
  • H228: Flammable solid.
  • H336: May cause drowsiness or dizziness.
  • H280: Contains gas under pressure; may explode if heated.
  • H304: May be fatal if swallowed and enters airways.
  • H319: Causes serious eye irritation.
  • H361: Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
  • H412: Harmful to aquatic life with long lasting effects.

P phrases

  • P251: Do not pierce or burn, even after use.
  • P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
  • P312: Call a POISON CENTER/doctor/… if you feel unwell.
  • P273: Avoid release to the environment.
  • P338: Remove contact lenses, if present and easy to do. Continue rinsing.
  • P305: IF IN EYES:
  • P211: Do not spray on an open flame or other ignition source.
  • P337: If eye irritation persists:
  • P501: Dispose of contents/container to...
  • P101: If medical advice is needed, have product container or label at hand.
  • P313: Get medical advice/attention.
  • P103: Read label before use.
  • P410: Protect from sunlight.
  • P102: Keep out of reach of children.
  • P351: Rinse cautiously with water for several minutes.
  • P271: Use only outdoors or in a well-ventilated area.
  • P412: Do not expose to temperatures exceeding 50°C/ 122°F.
Read more Read less

70-425 Thermo Coating Black

  • Stock: 427 in stock
  • Item no.: 70-425-0401
  • Unit: 1 Spray(400 ML)
Limited quantity - item is being omitted

70-425 Thermo Coating Silver

  • Stock: 306 in stock
  • Item no.: 70-425-0402
  • Unit: 1 Spray(400 ML)
Limited quantity - item is being omitted