Inerta 70 Camouflage Paint An11

INERTA 70 is a polyurethane camouflage paint. Used as a topcoat in e.g. Camouflage Treatment Systems K110, K110B, K111, K111B, K113 and K113B.

The paint contains special reflective properties.

Approvals and certificates: Finnish Defense Forces, WITI (Poland).

Hardener Comp. B: INERTA 70 HARDENERS

Mixing ratio (A:B) 8:1 by volume

Pot life, 23 °C 6 h

Thinner TEKNOSOLV 9521, TEKNOSOLV 9502

PRE-TREATMENT
PRIMED SURFACES: Degrease and remove dirt. The surface is dried and dust and other foreign objects are removed before painting begins. If necessary, the surfaces are sanded. Other instructions regarding pre-treatment of the surface can be found in the standards EN ISO 12944-4 and ISO 8501-2.
APPLICATION
MIXING OF COMPONENTS: Consider the pot life of the mixture when calculating the amount to be mixed at one time. Before application, base and hardener are mixed in the right ratio. Carefully stir down to the bottom of the container. Inadequate agitation or incorrect mixing ratio results in insufficient curing and poorer film properties. Stir thoroughly before use. Apply with conventional or airless spraying. Suitable airless nozzle size. 0.011 - 0.015".
APPLICATION CONDITIONS
The surface to be treated must be dry. During application and drying, the temperature of the air, the surface and the product must be above +5 °C and the relative humidity below 80%.
STORAGE
The storage stability is indicated on the label. Store cool in tightly sealed packaging.