Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care and polishing
Tools and equipment
Safety
Smart repair
Teknos
Teknocoat Primer 1603 2K Acid-Curing
About the product
Teknocoat Primer 1603 Acid-curing 2K primer for wood with good filling properties and good sandability on chipboard and MDF. Medium thixotropic primer. Meets the E1 requirement in terms of formaldehyde decomposition.
Application method Spraying, carpet painting
Drying method Air, oven drying
Application data
Mixing ratio: 10 parts primer mix with 1.5 parts TEKNOCOAT HARDENER 1399
Spraying: approx. 2.5 parts TEKNOSOLV 1181/1182 for whisk. 25 s DIN 4 / 20 °C
Carpet painting: approx. ½ part TEKNOSOLV 1181/1182 for whisk. 35 s DIN 4 / 20 °C
Pot life: 1 day when diluted to 25 s DIN 4/20 °C.
Drying At 55% RH:
For grinding: 20 °C 3 hours / 40 °C 45 min / 60 °C 10 min
For stacking: 20 °C 16 hours / 40 °C 60 min / 60 °C 15 min
The drying times are based on the applied amount of 150 g of wet primer per m². After forced drying, the items must be cooled below 30 °C before stacking.
Recommended application amount Max 2 x 150 g wet primer per m².
Cleaning of equipment TEKNOSOLV 1181.
SAFETY DATA See safety data sheet.
OTHER INFORMATION
Before and after adding hardener, the primer must be stirred thoroughly.
Should not be applied and dried at temperatures below 18 °C.
Should not be applied and dried at a relative humidity above 70%.
- Industries: Industrial Wood Finishing
- Brand: Teknos
- Substrate: Træ
Safety and enviroment
GHS
H sentences
- H318: Causes serious eye damage.
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H302: Harmful if swallowed.
- H336: May cause drowsiness or dizziness.
- H335: May cause respiratory irritation.
- H413: May cause long lasting harmful effects to aquatic life.
- H225: Highly flammable liquid and vapour.
- H351: Suspected of causing cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
P phrases
- P361: Take off immediately all contaminated clothing.
- P353: Rinse skin with water [or shower].
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P240: Ground and bond container and receiving equipment.
- P233: Keep container tightly closed.
- P403: Store in a well-ventilated place.
- P501: Dispose of contents/container to...
- P303: IF ON SKIN (or hair):
Safety and enviroment
GHS
H sentences
- H335: May cause respiratory irritation.
- H226: Flammable liquid and vapour.
- H315: Causes skin irritation.
- H373: May cause damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H312: Harmful in contact with skin.
- H413: May cause long lasting harmful effects to aquatic life.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H336: May cause drowsiness or dizziness.
P phrases
- P303: IF ON SKIN (or hair):
- P353: Rinse skin with water [or shower].
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P304: IF INHALED:
- P501: Dispose of contents/container to...
- P361: Take off immediately all contaminated clothing.
- P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P340: Remove person to fresh air and keep comfortable for breathing.
- P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
Teknos 1633-04-9010-10
Teknocoat 1633-20 Ral 9010 White
€284,37
Teknos 1399-1
Teknocoat 1399 Hardener
€12,80
Teknos
Olv Thinner 1181
€54,49
Teknos
Teknosolv 1182 Thinner Slow
€55,55
Teknos
Teknocoat 35 1633-xx Base
€52,11