Colormatic Acrylic RAL Colors

The spray paint has an extremely high content of pigments and specific additives provide high coverage, high film thickness, good hold and good adhesion directly to metal. Thanks to the wide-beam atomization, it can also be used on larger surfaces. Depending on consistency and base color: 400 ml to approx. 0.8 - 1.0 m².

Here's how you do it

Thoroughly clean surfaces to be painted with ColorMatic Silicone Remover No. 174469, then sand. The area must be dry and free of dust and grease. Shake the spray can well for 2 minutes. Perform spray test. Apply 2-3 coats.

Drying time (at 20°C, 50% relative humidity): Dust dry: after approx. 10 minutes, dry to the touch: after 30 minutes. Note that the drying time depends on the ambient temperature, humidity and the thickness of the applied layer. Remember to wear a suitable respirator (recommended type A2/P3) Before use, read carefully and observe the warning texts on the label.