Pretreatment
Abrasives
Glue, sealer and putty
Masking
Paint and varnish
Mixing equipment
Spray equipment
Car care and polishing
Tools and equipment
Safety
Smart repair
Lechler
S26093 Plaster Six - Component A
About the product
S26093 Plaster Six is a 2K epoxy filler with low specific weight for high film thickness applications in the yachting sector. It’s useable both above and under the waterline. You must purchase Component B separately
Its excellent adhesion and flexibility characteristics make it suitable for levelling large surfaces suitably prepared and made of steel, aluminium, fibreglass, carbon fibre and wood.
It’s waterproof, with high adhesion, flexible, light – it only weighs 600 Kg/m3 - and it’s extraordinarily creamy.
Mixing ratio
1000 ml S26093 PLASTER SIX SOLUZIONE A - White
1000 ml S26094 PLASTER SIX SOLUZIONE B - Blue
The mixed product is blue
Substrate preparation
Stoppani epoxy primers dry sand with P280-320 paper.
Application
Knifing.
Avoid applications at temperatures below 10°C and above 35°C. At low temperatures avoid environments with high humidity, as the formation of a superficial sticky layer could make sanding difficult.
Maximum film thickness: 3,5 cm (35000 µ)
Recommended film thickness: not over 2 cm (20000 µ) per layer
Theoretical coverage A + B: 0,2 m2 for 1l at 0,5 cm (5000 µ) film thickness
Interval between coats: min. 24 h at 20°C
Solids content by volume: 100%
See technical datasheet for drying time.
Stoppani S26093 Plaster Six - Component A
-
Stock: Delivery 16-17 working days• Order item
-
Item no.: S26093L10
-
Unit: 10 L
