![05331 Multilight Universal Putty](/media/24725/lechler-05331-multilight-universal-putty.jpg?mode=pad&width=600&height=400&bgcolor=ffffff)
![05331 Multilight Universal Putty](/media/24726/05331-multilight.png?mode=pad&width=600&height=400&bgcolor=ffffff)
![05331 Multilight Universal Putty](/media/24725/lechler-05331-multilight-universal-putty.jpg?mode=pad&width=600&height=400&bgcolor=ffffff)
![05331 Multilight Universal Putty](/media/24726/05331-multilight.png?mode=pad&width=600&height=400&bgcolor=ffffff)
05331 Multilight Universal Putty
About the product
Lechler 05331 Multilight Universal Putty is a multifunctional polyester putty with l"ow weight" and high filling capacity. For use on steel or zinc-coated plates.
The putty is suitable for leveling large imperfections on steel or zinc-coated sheets used for industrial painting of cars and automobiles repair. 05331 Multilight has a good "lightness" (specific weight 1000 g/l) and with excellent adhesion on zinc-coated sheets, steel, cast iron, aluminum and fiberglass. Easy to apply, easy to sand, the putty is also characterized by a very high filling capacity and dries quickly. The putty is actually also suitable for being dried by IR lamps (normal and short waves).
Improvement of the substrate
Zinc-coated plates, steel, aluminium, these types of substrates must be roughened and degreased with 00695 SILICONE REMOVER SLOW. For old coatings, note that Multilight must not be applied to solvent-sensitive coatings. NEVER apply on Wash Primer and In case of previous primer application, use epoxy primers such as 04384 EPOFAN PRIMER R-EC GRIGIO and allow to dry.
Multilight putty is a 2K polyester putty, and therefore it must be mixed according to the mixing ratio (volume and weight) 05331 MULTILIGHT 1000 parts mix with 00281 POLYDUR HARDENER 10-30 parts. Note in summer the catalysis can be reduced to 1% and in winter it can be increased to 3%
Drying time: Multilight can be sanded after 20-30 min. at 20°C with IR lamps (drying times depend on the power of the lamp). Dry sanding with P60-80 grit paper and finishing with P120-150 grit paper.
Overcoat with a filler-sealer from the Lechler Car Refinishing series.
Multilight Universal Putty
-
Stock: Delivery 16-17 working days• Order item
-
Item no.: L0050331K0,75
-
Unit: 0,75 L
Safety and enviroment
GHS
![Flammable Gases](/media/27155/ghs02.webp?mode=pad&width=70&height=70)
H sentences
- H372: Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
- H361: Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
- H304: May be fatal if swallowed and enters airways.
- H226: Flammable liquid and vapour.
- H302: Harmful if swallowed.
- H319: Causes serious eye irritation.
- H412: Harmful to aquatic life with long lasting effects.
- H318: Causes serious eye damage.
- H335: May cause respiratory irritation.
- H332: Harmful if inhaled.
- H317: May cause an allergic skin reaction.
- H315: Causes skin irritation.
- H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
- H314: Causes severe skin burns and eye damage.
P phrases
- P338: Remove contact lenses, if present and easy to do. Continue rinsing.
- P305: IF IN EYES:
- P405: Store locked up.
- P351: Rinse cautiously with water for several minutes.
- P308: IF exposed or concerned:
- P260: Do not breathe dust/fume/gas/mist/vapours/spray.
- P313: Get medical advice/attention.
- P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P280: Wear protective gloves/protective clothing/eye protection/face protection.
- P501: Dispose of contents/container to...
- P201: Obtain special instructions before use.