2K Hi-Speed Clear Coat Glossy
About the product
ColorMatic 2K Clear Coat Glossy is a 2-component high-gloss clear coat in a spray. extremely scratch resistant. High resistance to petrol, UV, and weather effects.
The clear lacquer is used for corrosion and oxidation protection on metal substrates such as steel, zinc, aluminium, copper, brass and ground and brushed stainless steel.
Due to its fast drying time, very good flow and easy polishing, ColorMatic 2K clear coat is particularly suitable for spot repairs. Use the ColorMatic spot blender for spot repairs. The base color can be painted over with ColorMatic 2K hi-speed clearcoat after drying for 30 minutes. 2-3 full layers, 50µ. Let dry for 2 minutes between coats.
Drying time (at 20°C, 50% relative humidity): Dust dry: after approx. 5 minutes. Dry to touch: after approx. 5 hours. The drying time depends on the ambient temperature, humidity and the thickness of the applied layer.
200 ml is enough for approx. 0.3 - 0.4 m²
500 ml is sufficient for approx. 0.8 - 1.0 m²
Mixing A components with hardener:
Remove the protective cap from the bottom of the can and pull the pin completely out using the inserted ring. This will release the hardener into the clear coat. Shake the spray can thoroughly to mix the clear coat with the hardener, for about 2 minutes. Carry out spray tests before starting.
Shelf life: 24 hours at room temperature (20 - 25°C).
Use suitable respiratory protection (recommended type A2/P3) Before use, carefully read and observe the warning texts on the label!
- Base for binder: Acrylic
- Smell: solvent
- Degree of gloss (at measuring angle 60° according to DIN 67530): High gloss/gloss: 85 gloss units
- Substrate: solvent and water-based base color
- Temperature resistance: up to 120°C
- Color: Transparent
- Product type: Clearcoat
|Go Big||Number of sales units|
Safety and enviroment